Cloudy Firmware V2.0.1 - click to download firmware WAV file.

Click here to learn how to upload the file onto your Cloudy.

Cloudy Firmware V2.0.1 Update:

Saving and loading presets.

Saving a preset will store the mode and audio quality you are currently in as well as the position of all knobs (except input and output volume since those are analog).

Loading a preset loads the mode, audio quality and knob positions that were saved. If you press mode once you will see the mode that was saved. Turning the knobs will have no effect until you reach the position that was saved. This way you have to slowly scrub the knob to find the saved position and then you will be able to change that knob’s parameter. This helps you to remember saved knob positions and also doesn’t accidentally ruin your preset by touching a knob unintentionally.

After loading a preset, if you change the effect mode, the knobs will take the value of whatever actual position they are in. This way you don’t have to go searching for where the knob was saved.

To save a preset: Press and hold the mode button for one second or until three indicator LEDs start to blink with one indicator fading in and out.

The single fading led represents the preset location.

You can single press the mode button to move through different preset save locations.

There are three banks with four spots in each bank for a total of 12 presets.

First bank is red. Second bank is white. And third bank is pink.

Once you settle on a location press and hold the mode button until the indicator leds turn off.

Congratulations, you just saved a preset on Cloudy.

To load a preset: This is a mirror of the saving process.

Press and hold the audio quality button for one second or until three indicator LEDs are fading and one is blinking.

The blinking LED represents the preset location you want to load.

You can single press the audio quality button to move through the different presets to load.

Once you settle on the preset you want to load, press and hold the audio quality button until the indicator lights turn off.

Congratulations, you just loaded a preset on Cloudy.

There’s a shortcut to loading presets.

If you press both foot switches at the same time you will enter preset loading mode.

Use the freeze foot switch to scroll through the different presets.

Press and hold the freeze footswitch until the indicator lights turn off.

You just loaded a preset using the foot switches.

If you enter this mode accidentally you can cancel by pressing bypass (on button) once or wait and do nothing for 3 seconds.